If you need a clean cut in a flat surface on your site, either internally or externally then you are probably looking for concrete floor sawing. National Drilling Services is a specialist in providing sawing, cutting, drilling and demolition operatives and equipment. Working on construction sites all around the UK we have a reputation in the industry for reliability and good service. In fact, our clients rate National Drilling Services as the number one choice for industrial floor sawing in the UK. You can read more about us on our home page.
Our team prides themselves in delivering professional services, with high-level health and safety records to the industry, whether concrete floor sawing, drilling, cutting or demolition operations. However, you probably want to find out more about the technical side of concrete floor sawing…
Concrete Floor Sawing – Technical Information
Our experienced operatives are fully trained to provide expert concrete floor sawing to meet with your design plans. With a range of sizes of diameter of high-quality diamond blades available in our store, we can provide concrete floor sawing to the depth you require up to 500mm. Using diamond blades ensures a clean cut with minimal time and delay to the rest of your site works. These large diamond blades are attached to a shaft which is part of a robust push along machine. So whether you are fitting out a new warehouse and require cuts in the concrete floor to slot in cables or fix new racking or you are working externally and require concrete floor sawing for roadways, carriages and bridges, we have the equipment to complete the job.
How is your concrete floor sawing equipment fuelled?
You might be surprised how often we get asked how our machine is fuelled. This is an important question as it very much depends on the location of the site and whether the concrete floor sawing is taking place internally or externally. At National Drilling Services our equipment can be powered by 3 phase electric, petrol or diesel to suit the site situation and environment as well as the availability of power. For internal concrete floor sawing operations, we would usually choose to use the machine on the 3 phase electric mode, as this is better for enclosed areas as no fumes are released. However, for external concrete floor sawing, especially on roads, carriageways or bridges where we might be a long way from a power source and there is less risk from fumes, we would select the petrol or diesel option.
To discuss your specific concrete floor sawing requirements give us a call on 0161 443 2822. Alternatively, if you need to send us more technical plans you may wish to email us your requirements to email@example.com.